High Vacuum Industrial Air Filter for Welding

• Certification: CE, ISO
• Installation Method: Vertical
• Operation Type: Automatic
• Dust Collecting Method: Dry
• Type: Filter Cartridge Dust Collector
• Air Volume: 450m³/H
• Model NO.: KSG-3.4A
• Motor Power: 3.4kw
• Filter Area: 20m²
• Weight: 265kgs
• Transport Package: Wooden Case
• Specification: 700*700*1850mm
• Trademark: Kaisen
• Origin: Shanghai, China
• HS Code: 8421399090
• Production Capacity: 100sets/Month

Product Description

 

Features

1. The air purifier applies to all kinds of soot purifications caused by welding,  grinding, as well as recycling of rare metals, precious materials, etc  

2.  For the potential of fire and molten slag particles, three protective measures are used inside purifier, to make it a longer life, more secure and reliable.

3.  Intelligent model using PLC automatic control makes operation easy, filter rotates with the use of full-automatic cleaning in all directions, so that there is a more thorough cleaning filter surface, always to guarantee a constant air volume absorption. Filter is made of  imported microporous PTFE film ,and can filter out welding fume of 0.1μm filtering with high precision can meet GB indoor emission standards. And can filter out welding fume of 0.1μm

4. Power phase sequence instructions,  short-circuit protection for lack of phase, with shutdown protection measures when too high temperature.

5. With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature, wear-resistant compounded materials, without crack and damage for  sparks but  longer life.

6. Photoelectric switch, efficient and energy-saving, with lighting fixtures cantilever cover (optional).

7. The plasma and laser cutting fume extractor averagely divides the cutting platform into partitions of equal width , a dust collector for both fume absorption and dust holding is configured in each partition. The valve is set at the end of each partition, and is in linkage with the pneumatic tappet. When the cutting gun arrives any position, the corresponding valve automatically opens, and always ensures that ventilation is just implemented only in the cutting areas that generate fume. This system greatly reduces the amount of wind needed, thus saves the consumption of electric energy.

 

Parameters 

Model	KSG-3.4A	KSG-5.5A
Treatment of air flow	450 m3/h	700m3/h
Motor Power	3.4 Kw	5.5Kw
Voltage	380 V/50 Hz	380 V/50 Hz
Filtering area	20 m2	20m2
Cleaning Methods	Automatic Cleaning	Automatic Cleaning
Compressed Air	26000-29500pa	26000-29500pa
Filtration efficiency	>99.9%	>99.9%
Noise	≤72±5dB(A)	≤72±5dB(A)
Weight	265±5Kg	295±10Kg

Company profile

Shanghai Kaisen Environmental Technology Co.,Ltd has beenalways committed to designing, R&D and manufacturing of industrial dust collectors.Since 2007 we had been engaged in dust collectors for ten years.Our products are extensively applied to the processing of welding, cutting, grinding, painting, casting, chemical, wood processing, paper and other industries. 

Exhibition