| Customization: | Available |
|---|---|
| Certification: | CE, ISO, EMC |
| Installation Method: |
Horizontal |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Large air flow single arm easy movable welding smoke cleaner filter
Features
1. Fume collector is configured with one suction arm. The bottom has two directional and two rotary
polyurethane casters with brake device for easy moving and stationing. It is suitable for the purification of
fume and dust generated in all kinds of welding, grinding and other places as well as for collecting rare metal
particles and precious materials.
2. Suction arm can be rotated 360 °, and can flexibly and easily reach the position and angle of sucking by
pulling the handle of the hood and position by itself in the absence of external force. Depending on needs,
2m, 3m flexible suction arm are available. Suction hose uses high temperature-resistant, flame retardant and
wear-resistant composite materials, and will not crack after burning through by spark and has a longe usage
life; the arm diameter is 160mm.
3. Fume generated in working will be sucked into the purifier through the hood, first through the fire resistance
net, large particles and sparks produced in grinding is intercepted and separated; then enter fume directing
layer,i.e. deflector, to ramify the fume to avoid residual spark into the main filter cartridge directly; at last the
fume enter the third layer i.e. the main filter cartridge, for ultimate purification, and it's filtration efficiency
reach 99.9%.As the filtering precision of the main filter cartridge reach the indoor emission standards, clean
air after filtration can be directly discharged indoor through the air vents in the bottom of the purifier.
4. Power phase sequence instructions, short-circuit protection for lack of phase, with shut down protection
measures when too high temperature.
5. With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature, wear-
resistant compounded materials, without crack and damage to sparks. The filter element of the welding fume extractor is produced using imported PTFE membrance filter material of high filtration precision and can filter
out welding fume of 0.1μm.
Technology parameter:
| No. | Item | Parameter |
| 1 | Fan type | centrifugal fan |
| 2 | Treatment of air flow | 1800±100 m3/h |
| 3 | Motor power | 1.5kW |
| 4 | Power supply | 380V ~/50Hz |
| 5 | Filtration area | 8 m2 |
| 6 | Number of filter cartridges | 1 Pc |
| 7 | Filter medium | Polyester |
| 8 | Filtration efficiency | >99.9% |
| 9 | Noise | ≤74±5dB(A) |
| 10 | Ash hopper volume | 3L |
| 11 | One suction arm | 1 Pc Ø160mm*3m |
| 12 | Weight (excluding suction arm) | 120±5KG |
| 13 | Dimensions(excluding suction arm) | 550×550×1165mm |
){kind=link}