| Customization: | Available |
|---|---|
| Certification: | CE, ISO, RoHS |
| Installation Method: |
Vertical |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Features
♦Apply to all kinds of soot purifications caused by welding, grinding, as well as recycling of rare metals, precious
materials, etc.
♦ For the potential of fire and molten slag particles, three protective measures are used inside purifier, to make it a
longer life,more secure and reliable.
♦Power phase sequence instructions, short-circuit protection for lack of phase, with shutdown protection
measures when too high temperature.
♦With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature, wear-
resistant compounded materials, without crack and damage to sparks, its life shorter than the model of
intelligent.
♦Suction arm can be rotated 360 °, and reach the point of destination and angle of inhale dust and air by pulling
the handle of the hood with the operator's will flexibly and easily and position by itself in the absence of
external force. Depending on needs, 2m, 3m or 4m flexible suction arm are optional.
♦Suction arm uses real temperature-resistant, flame retardant and wear-resistant composite materials, and will
not crack after burning through by spark with longer life; the arm diameter is160mm.
Parameter
| Model | KSJ-0.7B |
| Treatment of air flow | 1000 m3/h |
| Motor Power | 1.1kW |
| Voltage | 1×220 V/50 Hz |
| Filtering area | 15m2 |
| Cleaning Methods | Manual changing filtering |
| Compressed Air | 0.5-0.6 Mpa |
| Filtration efficiency | >99.9% |
| Numbers of supporting cantilevers | 1 pcs φ160mm length 2.0 m |
| Noise | ≤68±5dB(A) |
| Diamension | 660×760×1200mm |
| Weight | 138±5 Kg |
Company Information
Factory building
Accessories of sunction arms for Central dust purifiersSome Actual Projects
){kind=link}