High Vacuum Robot Welding Fume Extraction System Dust Collector Reduce Air Pollution

• Customization: Available
• Certification: CE, ISO
• Installation Method: Vertical
• Model NO.: KSG-3.4A
• Operation Type: Automatic
• Medium Material: PTFE
• Dust Collecting Method: Dry
• Type: Filter Cartridge Dust Collector
• Air Volume: 450m³/H
• Motor Power: 3.4kw
• Filter Area: 20m²
• Weight: 265kgs
• Transport Package: Wooden Case
• Specification: 700*700*1850mm
• Trademark: Kaisen
• Origin: Shanghai, China
• HS Code: 8421399090
• Production Capacity: 100sets/Month

Product Description

 

Features

1. The air purifier applies to all kinds of soot purifications caused by welding,  grinding, as well as recycling of rare metals, precious materials, etc  

2.  For the potential of fire and molten slag particles, three protective measures are used inside purifier, to make it a longer life, more secure and reliable.

3.  Intelligent model using PLC automatic control makes operation easy, filter rotates with the use of full-automatic cleaning in all directions, so that there is a more thorough cleaning filter surface, always to guarantee a constant air volume absorption. Filter is made of  imported microporous PTFE film ,and can filter out welding fume of 0.1μm filtering with high precision can meet GB indoor emission standards. And can filter out welding fume of 0.1μm

4. Power phase sequence instructions,  short-circuit protection for lack of phase, with shutdown protection measures when too high temperature.

5. With large air volume, low noise and better capture effect. Suction hose uses the real anti-temperature, wear-resistant compounded materials, without crack and damage for  sparks but  longer life.

6. Photoelectric switch, efficient and energy-saving, with lighting fixtures cantilever cover (optional).

7. The plasma and laser cutting fume extractor averagely divides the cutting platform into partitions of equal width , a dust collector for both fume absorption and dust holding is configured in each partition. The valve is set at the end of each partition, and is in linkage with the pneumatic tappet. When the cutting gun arrives any position, the corresponding valve automatically opens, and always ensures that ventilation is just implemented only in the cutting areas that generate fume. This system greatly reduces the amount of wind needed, thus saves the consumption of electric energy.

 

Parameters 

Model	KSG-3.4A	KSG-5.5A
Treatment of air flow	450 m3/h	700m3/h
Motor Power	3.4 Kw	5.5Kw
Voltage	380 V/50 Hz	380 V/50 Hz
Filtering area	20 m2	20m2
Cleaning Methods	Automatic Cleaning	Automatic Cleaning
Compressed Air	26000-29500pa	26000-29500pa
Filtration efficiency	>99.9%	>99.9%
Noise	≤72±5dB(A)	≤72±5dB(A)
Weight	265±5Kg	295±10Kg

The high-pressure fan will generate a strong vacuum suction force, forcing the fume to move to the air inlet and enter the extractor for purification. While the wire mesh filter filters out sparks, the fume is evenly divided by the deflector, and then filtered by the filter cartridge. At the same time, the large particles fall into the dust collector/fume extractor under the action of gravity, while the small particles float in the vortex caused by suction and be filtered by the extractor. Small particles coalesce on the layer surface of the filter cartridge, and then fall into the dust box under the action of gravity. The purified air is discharged into the workshop through the air outlet.


Company profile

Shanghai Kaisen Environmental Technology Co.,Ltd has beenalways committed to designing, R&D and manufacturing of industrial dust collectors.Since 2007 we had been engaged in dust collectors for ten years.Our products are extensively applied to the processing of welding, cutting, grinding, painting, casting, chemical, wood processing, paper and other industries. 

Exhibition

Why Dust Filtration is Needed
Dust is dangerous if inhaled and may cause different kinds of lung diseases and cancer.
Dust gathers on walls and machines making them dirty and unsanitary.
Dust can cause damage to computers and other electronic equipment.
Large concentrations of dust results in increased explosion risks.

A welding fume extractor is a precious ally in all industries in which welding is part of the production process. Welding produces various kinds of dusts and fumes, most of which are toxic or harmful for human health when not removed before coming into contact with workers. In order to avoid direct exposure in such kind of dangerous working environment, employer should take actions to protect workers, such as using welding fume extractor, welding helmet...

Kaisen strives to bring the innovative solutions to protect people from the harmful effects of dust, smoke, gas and other air impurities. Many of our products are designed and manufactured to have minimal environmental strain but still maintain top quality and performance. Kaisen's products are used around the world and could be found in various industries including: Welding Shops, Automotive, Foundries, Technical Schools, Nuclear Training facilities, Robotic Cells, and much more.